Home > Trakpactor 1412

TEREX Pegson has reconfirmed its commitment to continual product improvement. Designed specifically for the heavy duty recycling applications with high re-bar content, we are now able to offer an option of an under pan feeder for the 1412 Trakpactor.

The vibratory pan feeder is situated immediately below the crusher outlet and replaces the deflector which is supplied as standard on the 1412 Trakpactor.

The pan assembly is driven by a hydraulic motor which and two out of balance shafts. It is mounted springs which allow the pan to move in a back-and-downward motion and in an up-and-forward motion. These combined motions cause any material discharged onto the pan feeder to move forwards until it discharges onto the main product belt.

The pan feeder is 2.5m long by 1.1m wide and is fully lined with Hardox 400 wear resistant plate. The under pan feeder retains the excellent conveyor access provided by the hydraulic lower conveyor system from the standard plant.

The 1412 Trakpactor has many benefits against comparative sized machines and its other features include:

Features:

Direct vee-belt drive
Very low fuel consumption
Minimal hydraulic oil consumption versus expensive hydraulically driven crushers
Capacity up to 550 tons per hour
Crusher hydraulic setting and overload protection
Hydraulic conveyor lowering for access and easy transportation
Hugh reduction ratios will produce 85% minus 40mm on primary limestone applications
Wide speed variation available without the need to change pulleys
Highly fuel efficient
Fluid coupling crusher drive
Optional magnet, dirt conveyor and radio remote control

Go to Enquiry Form